Altona Mining Limited: Neues Cluster von Kupfer-Gold-Entdeckungen zeichnet sich auf Cloncurry ab

Altona Mining Limited: Neues Cluster von Kupfer-Gold-Entdeckungen zeichnet sich auf Cloncurry ab

– Ausgezeichnete Bohrergebnisse von drei Zielen 25 bis 30km südlich von Little Eva.
– Companion: 32m mit 1,48% Kupfer, 0,98 g/t Gold ab Oberfläche.
– Veiled: 74m mit 0,53% Kupfer, 0,23 g/t Gold ab Oberfläche.
– Quamby: 13m mit 0,61% Kupfer, 4,6 g/t Gold ab 29m einschließlich 2m mit 23,6 g/t Gold ab 30m.
– Die höchsten Gehalte schließen ein: 8,6% Kupfer, 27 g/t Gold, 85 g/t Silber u d 0,2% Kobalt.
– Viele weitere Ziele wurden nur unzureichend oder nicht geprüft.

Altona Mining Limited (Altona oder das Unternehmen – https://www.youtube.com/watch?v=NeaBPsGMkhc) meldet heute die Ergebnisse eines 30 Bohrungen umfassenden RC-Programms, das Ende 2017 auf dem Kupferprojekt Cloncurry (Cloncurry) durchgeführt wurde. Das Programm war dazu konzipiert, in den Prospektionsgebieten Companion, Veiled und Quamby neue Kupfer-Gold-Anomalien im Boden zu überprüfen. Die wichtigsten Bohrergebnisse schließen ein:

Companion32m mit 1,48% Kupfer, 0,98g/t Gold

15m mit 1,44% Kupfer, 0,84g/t Gold
35m mit 1,33% Kupfer, 0,23g/t Gold

Veiled 74m mit 0,53% Kupfer, 0,23g/t Gold
24m mit 0,84% Kupfer, 0,22g/t Gold
25m mit 0,68% Kupfer, 0,10g/t Gold

Quamby 13m mit 0,61% Kupfer, 4,23g/t Gold
einschließlich 2m mit 23,55g/t Gold

60m mit 0,44% Kupfer, 0,05g/t Gold
25m mit 0,52% Kupfer 0,07g/t Gold

Die Prospektionsgebiete ergänzen ein sich südlich der geplanten Minenentwicklung Little Eva auf Cloncurry abzeichnenden Cluster (Ansammlung) von Kupfer-Gold-Entdeckungen. Das Cluster umfasst ebenfalls die Prospektionsgebiete Hobby und Reaper (Pressemitteilung vom 29. November 2016).

Die kurzen und zu Erkundungszwecken niedergebrachten Bohrungen durchteuften eine Oxid- und Sulfidvererzung. Erwähnenswert sind die höheren Goldgehalte im Vergleich zu den Lagerstätten, die im Minenplan der Entwicklung von Little Eva eingeschlossen sind. Höhere Silbergehalte in Quamby und hohe Kobaltgehalte in Veiled wurden ebenfalls verzeichnet. Die erbohrten Gestreine (Abbildungen 1 bis 3) und Elementparagenesen sind typisch für IOCG-Lagerstätten (Iron Oxide Copper Gold, Eisen-Oxid-Kupfer-Gold-Lagerstätten).

Der Gehalt der Vererzung ist ausgezeichnet, mit höchsten einzelnen Analysenergebnissen von 11,2%, 9,3% und 8,7% Kupferäquivalent aus Companion; 3,0%, 2,4% und 2,3% Kupferäquivalent aus Veiled und 27,1 g/t und 20 g/t Gold aus Quamby.

Auf Companion besitzt das vererzte System Potenzial, umfangreich zu sein, da anomale Gehalte im Boden über eine Fläche von 0,6 x 3km abgegrenzt wurden. Die Bohrungen wurden in großen Abständen über nur 1,2km Streichlänge niedergebracht.
http://www.irw-press.at/prcom/images/messages/2018/42379/08022018_DE_AOH0889-Emerging New Cluster.001.jpeg

Abbildung 1: Kupferoxidvererzung (Malachit) aus Bohrung CPR628 auf Companion. Von links nach rechts: 5-6m 2,83% Kupfer, 1,77 g/t Gold; 6-7m 2,96% Kupfer, 0,65 g/t Gold; 7-8m 2,28% Kupfer, 1,81 g/t Gold.

http://www.irw-press.at/prcom/images/messages/2018/42379/08022018_DE_AOH0889-Emerging New Cluster.002.jpeg

Abbildung 2: rote Gesteinsalteration und Kupferkiesvererzung typisch für IOCG-Lagerstätten aus 52-55m Tiefe in Bohrung CPR633 auf Companion. Kupfergehalte reichen bis zu 0,78% mit Gold bis zu 0,44 g/t.

http://www.irw-press.at/prcom/images/messages/2018/42379/08022018_DE_AOH0889-Emerging New Cluster.003.jpeg

Abbildung 3: Kupfervererzung (Malachit und Kupferglanz) in Brekzien aus Aufschlüssen typisch für IOCG-Lagerstätten; aus historischen Abbaustätten in Prospektionsgebiet Veiled.

Prospektionsgebiet Companion

Im Prospektionsgebiet Companion (Abbildungen 4 bis 9) führt die Kombination der neuen Bohrergebnisse und der Bohrergebnisse früherer Betreiber mit der Geologie und der Bodengeochemie zur Bestätigung der Entdeckung eines großen, tektonisch kontrollierten Kupfer-Gold-Systems.

Dieses Bohrprogramm umfasste 9 Bohrungen, die in Tiefen von 48m bis 96m in Abständen von ungefähr 300m entlang der nördlichsten 1,2km einer größeren 3km langen Kupferanomalie im Boden niedergebracht wurden. Der südliche Teil der Anomalie wurde im Wesentlichen nicht abgebohrt ausgenommen kurze Erkundungsbohrungen für geochemische Zwecke. Die Bodenanomalien kommen in drei subparallelen Zonen vor und die Vererzung wurde in allen drei Zonen durchteuft. Eine reichhaltige Kupfer-Gold-Vererzung wurde innerhalb einer mächtigeren niedriger-haltigen Vererzung angetroffen. Die Ergebnisse waren aufgrund der erhöhten Goldgehalte erwähnenswert und dass viele Abschnitte aus sehr geringen Tiefen stammen.

Bessere Bohrergebnisse bei einem Cut-off-Gehalt von 0,3% Kupferäquivalent schließen ein:

– 32m mit 1,48% Kupfer, 0,98g/t Gold ab Oberfläche (CPR628)
– 15m mit 1,44% Kupfer, 0,84g/t Gold ab 25m (CP629)
– 35m mit 1,33% Kupfer, 0,23g/t Gold ab 4m (CPR634)

Die Vererzung kommt innerhalb subparalleler steil einfallender Zonen vor. Die Vererzung setzt sich zusammen aus Kupferkies und Pyrit in stark verkieseltem Quarzit in frischem Gestein. Die Vererzung kommt in Form von Malachit und Goethit in der verwitterten Zone vor, im Allgemeinen bis 30m Tiefe.

Es ist wahrscheinlich, dass die hochgradige Vererzung entlang der vererzten Zonen in Form separater Erzgänge und Erzfälle entwickelt ist. Die Vererzung ist offen im Streichen und zur Tiefe. Die Abbildungen 8 und 9 zeigen Profilschnitte von Companion, die die steil einfallenden hochgradigen Erzgänge veranschaulichen.

Frühere Erkundungsbohrungen der ehemaligen Betreiber auf Companion lieferten:

– 34m mit 0,75%, 0,21g/t Gold
– 12m mit 0,73%, 0,32g/t Gold
– 19m mit 0,87%, 0.32g/t Gold

Die Lage der Bohrungen zeigen die Abbildungen 6 und 7. Die vollständigen Ergebnisse sind in Tabelle 1, Einzelheiten der Bohransatzpunkte finden Sie in Tabelle 2 und JORC-Tabelle 1 ist im Appendix 1 (Anhang 1) zu finden.

Prospektionsgebiet Veiled

Auf dem Prospektionsgebiet Veiled (Abbildungen 4, 5 und 10) weisen die Bohrergebnisse und die Bodengeochemie auf die Entdeckung eines signifikanten Kupfer-Gold-Systems. Auf Veiled wurde in der Vergangenheit nicht gebohrt. Das Prospektionsgebiet ist ein 130m x 260m großer separater Treffer mit hochgradiger Kupferanomalie im Boden, die im Rahmen von Probennahmeprogrammen während der letzten zwei Jahre identifiziert wurde. Es gibt kleine nicht sehr tiefe Abbauspuren aus den frühen 1900er-Jahren innerhalb der Anomalie an nach Norden streichenden Strukturen mit vererzten brekzienartigen Metasedimenten und einer Brauneisenzone (eiserner Hut), die in Aufschlüssen und als Lesesteine vorkommen.

Auf dem Prospektionsgebiet wurden 4 kurze RC-Erkundungsbohrungen bis in Tiefen von 54 bis 90m auf zwei Profilen im Abstand von 100m niedergebracht. Sie zielten auf das Zentrum und den nördlichen Ausläufer der Anomalie.

Die Kupfer-Gold-Anomalie wurde innerhalb einer niedriger-haltigen Vererzung in drei Bohrlöchern angetroffen. Bessere Bohrergebnisse bei einem Cut-off-Gehalt von 0,3% Kupferäquivalent schließen ein:

– 74m mit 0,53% Kupfer, 0,23g/t Gold ab Oberfläche (VLR001)
– 24m mit 0,84% Kupfer, 0,22g/t Gold ab Oberfläche (VLR002)
– 25m mit 0,68% Kupfer, 0,10g/t Gold ab 10m (VLR003)

Eine Bohrung (VLR002) endete in der Vererzung. Die Vererzungszone ist zur Tiefe offen, während die Grenzen der Kupferanomalie im Boden noch nicht weiter überprüft wurden.

Die Vererzung kommt zusammen mit Kupferkies und Pyrit in alterierten Metasedimenten vor, die in frischem Gestein beherbergt sind. Lokal kommen erhöhte Kobaltgehalte vor (bis zu 0,2%) mit dem besten Abschnitt von 6m mit 0,12% Kobalt in VLR001 ab 10m Tiefe. Die Vererzung ist ebenfalls aufgrund ihrer erhöhten Goldgehalte erwähnenswert.

Die Basis der Verwitterung liegt in ungefähr 30m Tiefe und die Vererzung kommt in Form von Malachit zusammen mit an Goethit-Hämatit reichen Zonen vor. Höhergradige Zonen innerhalb der Oxidzone könnten eine primäre Vererzung oder deszendent angereicherte Zonen reflektieren. Weitere Bohrungen sind notwendig.

Abbildung 11 zeigt einen Profilschnitt von Veiled, der die erkennbaren steil einfallenden hochgradigen Zonen veranschaulicht. Die Lage der Bohrungen zeigt die Abbildung 10. Die vollständigen Ergebnisse sind in Tabelle 1 aufgeführt, Einzelheiten der Bohransatzpunkte finden Sie in Tabelle 2 und JORC-Tabelle 1 ist im Appendix 1 (Anhang 1) zu finden.

Prospektionsgebiet Quamby

Auf dem Prospektionsgebiet Quamby (Abbildung 4, 5 und 12) wurden die nur unzureichend verstandenen reinen Goldanomalien und angrenzenden Kupfer-Gold-Anomalien im Boden durch Bohrungen überprüft.

Das Ziel umfasst erhöhte Goldgehalte im Boden in der Umgebung der historischen Goldmine Quamby, die laut Berichten mittels Laugungsverfahren in den 1980er- und 1990er-Jahren 75.600 Unzen Gold produziert hat. Die Mine wurde durch Bohrungen überprüft, aber nur ein paar der Ergebnisse waren auffindbar. Diese zur Verfügung stehenden Ergebnisse umfassen 16 Bohrungen (siehe Quartalsbericht September 2017), die sich mit den Bodenanomalien südlich der bestehenden Abbaustätten decken. Westlich der Mine liegt eine große Kupfer-Gold-Anomalie, die sich zum Teil mit der Goldanomalie auf Quamby überschneidet.

Kurze RC-Erkundungsbohrungen, 17 Bohrungen bis in Tiefen von 60 bis 174m auf Profilen in Abständen von 80 bis 200m, zielten darauf, die Kupfer-Gold-Anomalie im Boden zu überprüfen. Eine einzelne Bohrung wurde bis unter die Mine Quamby niedergebracht.

Alle Bohrungen, die auf die Kupferanomalie im Boden zielten, trafen auf eine Vererzung. Die Bohrungen deuten bis zu 75m mächtige Zonen einer niedrig-haltigen Kupfervererzung mit darin vorkommenden höhergradigen Zonen an.

Die Vererzung kommt in Form von eingesprengtem Kupferkies und Pyrit vor, die in stark alterierten Metasedimenten in frischem Gestein beherbergt ist. In der bis in 25m Tiefe reichenden Verwitterungszone kommt die Vererzung in Form von Malachit, gediegenem Kupfer und Kupferglanz vor. Goldgehalte von bis zu 27,1 g/t wurden angetroffen.

Bessere Bohrergebnisse bei einem Cut-off-Gehalt von 0,3% Kupferäquivalent schließen ein:

– 13m mit 0,61% Kupfer, 4,23g/t Gold ab 29m (QMR001)
– einschließlich 2m mit 23,6g/t Gold und 54g/t Silber ab 30m
– 60m mit 0,44% Kupfer, 0,05g/t Gold ab 10m (QMR012)
– 31m mit 0,46% Kupfer, 0,01g/t Gold ab 24m (QMR013)
– 25m mit 0,52 % Kupfer, 0,07g/t Gold ab 17m (QMR016)

Eine Bohrung (QMR001) lieferte hochgradige Gold- und Silbergehalte über 2m (23,55g/t Gold und 54 g/t Silber) innerhalb einer mächtigeren Kupfer-Gold-Vererzungszone und bestätigt ähnliche Bohrergebnisse früherer Betreiber (Abbildung 13). Die Vererzung hat einen einzigartigen silberreichen Charakter und wird kaum verstanden.

Abbildung 12 zeigt einen Bohrplan hinsichtlich der Bodenanomalien und veranschaulicht die breite Zone mit mehreren Abschnitten und die Beziehung zu der viel größeren Kupferanomalie im Boden. Die Lage der Bohrungen zeigt Abbildung 12. Die vollständigen Ergebnisse sind in Tabelle 1 aufgeführt, Einzelheiten der Bohransatzpunkte finden Sie in Tabelle 2 und JORC-Tabelle 1 ist im Appendix 1 (Anhang 1) zu finden.

Bei Fragen wenden Sie sich bitte an:

Alistair Cowden —
Managing Director —
Altona Mining Limited – –
Tel: +61 8 9485 2929 —
altona@altonamining.com –

David Ikin
Professional Public Relations
Perth
Tel: +61 8 9388 0944
David.Ikin@ppr.com.au

Jochen Staiger
Swiss Resource Capital AG
Tel: +41 71 354 8501
js@resource-capital.ch

Über Altona und das Kupferprojekt Cloncurry

Altona Mining Limited (Altona) ist ein an der australischen Börse ASX notiertes Unternehmen, das sich im Rahmen seiner Tätigkeit auf das Kupferprojekt Cloncurry (Projekt) im australischen Bundesstaat Queensland konzentriert. Das Projekt beherbergt Mineralressourcen, in denen rund 1,67 Millionen Tonnen Kupfer und 0,43 Millionen Unzen Gold enthalten sind. Vorgesehen ist zunächst die Anlage eines Kupfer-Gold-Tagebaubetriebs mit einer Förderleistung von 7 Millionen Tonnen pro Jahr und die Errichtung eines Konzentrators auf dem Projektgelände. Die Erschließung wurde mit einer geplanten Jahresproduktion(1) von 39.000 Tonnen Kupfer und 17.200 Unzen Gold für mindestens 14 Jahre genehmigt. Die definitive Machbarkeitsstudie wurde im Juli 2017 aktualisiert. Im November 2017 gab Altona die Absicht bekannt, mit der an der TSX notierten Copper Mountain Mining Corporation, ein großer kanadischer Kupferproduzent, zu fusionieren. Eine Abstimmung der der Aktionäre über das Übernahmeangebot (Scheme of Arrangement) wird Ende März 2018 erwartet.

1Bezugnahme auf die dieser ASX-Pressemitteilung beigefügte Information mit dem Titel Updated DFS Delivers Bigger and Better Cloncurry Copper Gold Project vom 2. August 2017; darin enthalten sind Informationen in Bezug auf dieses Produktionsziel sowie aus diesem Produktionsziel abgeleitete Finanzprognosen. Die Pressemitteilung kann unter www.altonamining.com oder www.asx.com.au eingesehen werden. Das Unternehmen bestätigt, dass die wesentlichen Annahmen in Bezug auf das Produktionsziel und die prognostizierten Finanzdaten, die sich aus dem in dieser Pressemeldung angeführten Produktionsziel ableiten, nach wie vor gültig sind und sich nicht wesentlich geändert haben.

Die Ausgangssprache (in der Regel Englisch), in der der Originaltext veröffentlicht wird, ist die offizielle, autorisierte und rechtsgültige Version. Diese Übersetzung wird zur besseren Verständigung mitgeliefert. Die deutschsprachige Fassung kann gekürzt oder zusammengefasst sein. Es wird keine Verantwortung oder Haftung: für den Inhalt, für die Richtigkeit, der Angemessenheit oder der Genauigkeit dieser Übersetzung übernommen. Aus Sicht des Übersetzers stellt die Meldung keine Kauf- oder Verkaufsempfehlung dar! Bitte beachten Sie die englische Originalmeldung aufwww.sedar.com , www.sec.gov , www.asx.com.au/ oder auf der Firmenwebsite!

Competent Persons Statement

The information in this report that relates to Exploration Targets, Exploration Results, Mineral Resources or Ore Reserves is based on information compiled by Dr Alistair Cowden, BSc (Hons), PhD, MAusIMM, MAIG, Mr Roland Bartsch, BSc(Hons), MSc, MAusIMM and Mr George Ross, MSc, MAIG. Dr Cowden, Mr Bartsch and Mr Ross are full time employees of the Company and have sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaking to qualify as a Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Dr Cowden, Mr Bartsch and Mr Ross consent to the inclusion in the report of the matters based on their information in the form and context in which it appears.

Copper Equivalence
Copperequivalent (CuEq) values are calculated using copper price US$2.95/lb and gold price of US$1,250/ounce and grade by the equation: CuEq. = copper % + (gold g/t x 0.62).

CopperEquivalent values do not specifically take into account the recoverability of copper or gold, however, for standard copper gold concentrates such as those at Little Eva, the differences in payability and recovery are small whereas the metal prices chosen have a large impact on the copper equivalent values.
http://www.irw-press.at/prcom/images/messages/2018/42379/08022018_DE_AOH0889-Emerging New Cluster.004.jpeg

Figure 4: Location of the Companion, Veiled and Quamby prospects within Altona tenure. The location of the proposed Little Eva processing plant is also highlighted (see ASX release dated 2 August 2017)

http://www.irw-press.at/prcom/images/messages/2018/42379/08022018_DE_AOH0889-Emerging New Cluster.005.jpeg

Figure 5: The Companion cluster. Location of the Companion, Veiled and Quamby prospects in relation to the identified resources at Lady Clayre and Ivy Ann and the 2016 discoveries at Reaper and Hobby. The background is levelled copper anomalism from soil sampling from various operators. The outline of Altonas tenure is in black. Altonas Mining Licences are highlighted in the dashed line at top.

http://www.irw-press.at/prcom/images/messages/2018/42379/08022018_DE_AOH0889-Emerging New Cluster.006.jpeg
Figure 7

Figure 6: Multiple zones of copper in soil anomalism over 3 kilometres long at Companion showing the location of 2017 drilling and drilling by prior operators.

http://www.irw-press.at/prcom/images/messages/2018/42379/08022018_DE_AOH0889-Emerging New Cluster.007.png

Figure 7: Drill hole location and results from 2017 drill programme at the Companion prospect. Drilling shown in relation to copper in soil anomalism and prior drilling by previous operations.

http://www.irw-press.at/prcom/images/messages/2018/42379/08022018_DE_AOH0889-Emerging New Cluster.008.jpeg

Figure 8: Cross section A from the Companion prospect. Refer to Figure 7 for location.

http://www.irw-press.at/prcom/images/messages/2018/42379/08022018_DE_AOH0889-Emerging New Cluster.009.jpeg

Figure 9: Cross section B from the Companion prospect. Refer to Figure 7 for location.

http://www.irw-press.at/prcom/images/messages/2018/42379/08022018_DE_AOH0889-Emerging New Cluster.010.jpeg

Figure 10: Copper in soil anomalism at the Veiled prospect showing the location of 2017 drilling.

http://www.irw-press.at/prcom/images/messages/2018/42379/08022018_DE_AOH0889-Emerging New Cluster.011.jpeg

Figure 11: Cross section C at the Veiled Prospect. Refer to Figure 10 for location.

http://www.irw-press.at/prcom/images/messages/2018/42379/08022018_DE_AOH0889-Emerging New Cluster.012.jpeg

Figure 12: Copper in soil anomalism at the Quamby prospect in relation to 2017 drilling and prior drilling by previous operators.

http://www.irw-press.at/prcom/images/messages/2018/42379/08022018_DE_AOH0889-Emerging New Cluster.013.jpeg

Figure 13: Cross section D at the Quamby prospect. Refer to Figure 12 for location.

Table 1: Significant RC Drill Intersections at 0.3% copper equivalent cut-off grade with sub-intervals at 1.0% copper cut-off grade.
Hole ID From To Width Copper Gold CuEq
(metres(metres(metres)(%) (g/t) (%)
) )

Companion
Prospect

CPR626 22 43 21 0.36 0.11 0.43
including28 33 5 1.06 0.26 1.22
54 73 15 0.36 0.17 0.57
CPR627 No significant
intercepts

CPR628 0 32 32 1.48 0.98 2.09
3 11 8 2.26 1.17 2.98
CPR629 25 40 15 1.44 1.95 1.95
including25 32 7 2.15 1.45 3.05
35 39 4 1.37 0.49 1.67
CPR630 18 26 8 1.95 1.83 3.09
including18 22 4 4.06 3.86 6.45
CPR631 17 21 4 0.50 0.03 0.52
CPR632 0 55 55 0.37 0.12 0.44
including0 18 18 0.59 0.22 0.73
30 45 15 0.40 0.10 0.46
CPR633 33 64 31 0.25 0.09 0.31
including51 64 13 0.41 0.17 0.51
CPR634 4 39 35 1.33 0.23 1.47
including17 33 16 2.39 0.48 2.69
Quamby Prospect
QMR001 29 42 13 0.61 4.28 3.27
including30 32 2 0.26 23.55 14.86
QMR002 No significant
intercepts

QMR003 55 108 53 0.32 0.01 0.33
QMR004 No significant
intercepts

QMR005 No significant
intercepts

QMR006 No significant
intercepts

QMR007 No significant
intercepts

QMR008 No significant
intercepts

QMR009 No significant
intercepts

QMR010 0 30 30 0.29 0.07 0.33
including22 29 7 0.66 0.02 0.68
QMR011 14 48 34 0.36 0.03 0.38
including40 47 7 0.88 0.04 0.90
QMR012 0 74 74 0.39 0.05 0.42
including10 38 28 0.34 0.05 0.38
46 70 24 0.64 0.03 0.66
62 70 8 1.12 0.02 1.14
QMR013 0 65 65 0.36 0.02 0.37
including0 13 13 0.37 0.04 0.39
25 55 30 0.46 0.01 0.48
QMR014 32 66 34 0.26 0.04 0.29
including33 47 14 0.41 0.03 0.42
59 64 5 0.30 0.09 0.36
QMR015 No significant
intercepts

QMR016 0 44 44 0.36 0.06 0.40
including17 32 15 0.53 0.09 0.58
37 42 5 0.81 0.03 0.83
QMR017 11 25 8 0.26 0.06 0.29
30 56 26 0.31 0.02 0.32
including53 55 2 1.80 0.15 1.89
Veiled Prospect
VLR001 0 74 74 0.53 0.23 0.67
including0 15 15 0.91 0.16 1.00
22 57 35 0.59 0.26 0.75
62 74 12 0.23 0.40 0.45
84 85 1 0.03 1.98 1.26
VLR002 0 35 35 0.63 0.16 0.72
including0 24 24 0.84 0.22 0.98
0 15 15 1.02 0.26 1.19
40 70 30 0.31 0.12 0.39
Hole terminated in mineralisation
VLR003 0 46 46 0.45 0.09 0.50
including10 35 25 0.68 0.10 0.74
13 24 12 1.06 0.14 1.15
VLR004 0 30 30 0.16 0.02 0.17
36 60 24 0.22 0.02 0.23
including38 43 5 0.44 0.05 0.47

Table 2: Location of drill hole collars
Hole ID Hole Easting NorthingDip Azimuth Final
Type (metres)(metres)( degree( degree Depth
s s
) ) (metres)
Companion Prospect
CPR626 RC 413657 7741201 -60.5 90 84
CPR627 RC 413652 7740876 -61.0 90 60
CPR628 RC 413644 7740874 -60.0 270 48
CPR629 RC 413617 7740881 -59.9 90 56
CPR630 RC 413827 7741497 -60.2 270 78
CPR631 RC 413874 7741499 -59.3 270 84
CPR632 RC 413975 7741205 -59.2 270 67
CPR633 RC 413583 7741203 -61.4 90 96
CPR634 RC 413908 7740950 -59.9 270 60
Veiled Prospect
VLR001 RC 409635 7741950 -58.2 270 90
VLR002 RC 409668 7741950 -60.8 270 70
VLR003 RC 409642 7741843 -59.8 270 54
VLR004 RC 409679 7741843 -59.8 270 60
Quamby Prospect
QMR001 RC 414294 7745744 -60.9 270 60
QMR002 RC 414300 7745840 -60.3 270 60
QMR003 RC 414280 7745958 -60.1 270 108
QUR004 RC 414335 7745960 -59.8 270 80
QMR005 RC 414235 7746480 -60.7 090 174
QMR006 RC 414050 7746550 -60.4 000 84
QMR007 RC 414318 7746087 -60.2 270 72
QMR008 RC 414351 7746092 -60.1 270 60
QMR009 RC 414268 7746160 -61.2 270 60
QMR010 RC 414080 7745844 -61.6 270 60
QMR011 RC 414102 7745842 -59.6 270 60
QMR012 RC 414141 7745844 -60.0 270 75
QMR013 RC 414173 7745842 -60.6 270 66
QMR014 RC 414238 7745839 -60.3 270 66
QMR015 RC 414267 7745838 -60.8 270 60
QMR016 RC 414109 7746003 -61.4 270 60
QMR017 RC 414174 7746160 -60.2 270 60
Total- 2,172

APPENDIX 1: TABLE 1 OF THE 2012 EDITION OF THE JORC CODE

The table below is a description of the assessment and reporting criteria used in reporting the Exploration Results that reflects those presented in Table 1 of The Australasian Code for the Reporting of Exploration Results, Mineral Resources and Ore Reserves.

Section 1: Sampling Techniques and Data
Criteria Commentary
Sampling Sampling was via a reverse circulation (RC)
techniques drilling rig to obtain 1 metre samples
weighing an average 3-4kg. Samples were
produced using a rig mounted cyclone and cone
splitter. The majority of the samples were
recorded dry. All samples were sent to be
analysed at ALS laboratories in
Townsville.

Soil samples are surface samples (top 10 to 20c
m) sieved to -2mm to obtain a ~100g sample
size. Sampling is conducted only when
dry.

Rockchip samples were collected from patchy
surface rock subcrop or outcrops and are
typically chip samples across exposed rock
faces over an area
<1m
2 and are commonly selective targeting
mineralised or altered rock
exposures.

All rockchip and duplicate (referee) soil
analyses were analysed at ALS laboratories in
Townsville.

Drilling Reverse circulation using 5.5 face sampling
techniques hammer. Drilling was conducted by Kelly
Drilling Pty Ltd using a truck mounted
Schramm 450WS.

Drill Recovery was visually estimated and recorded.
sample Recoveries are considered to be excellent
recovery averaging well over 90%, generally 100%.
Occasionally lower recoveries were recorded
within the top few meters prior to the casing
of the hole.

Every individual sample was collected into the
cyclone prior to riffle splitting using a
cyclone-mounted splitter. Cyclone and
sampling equipment was checked and cleaned
after each
rod.

No significant changes in recoveries through
the mineralised zones hence no subsequent
bias to the
grade.

Logging Logging was completed by Altona Mining
geologists at the rig from wet rock chip
samples using Altona logging
procedures.

Logging is qualitative and quantitative
including, colour, lithology, mineralisation,
alteration, sulphide and oxide mineralogy,
sulphide and oxide amount, texture, grain
size and
structure.

All holes were logged in full.
Sub-samplinNo drill core.
g The RC samples were split to 3-4kg sample
techniques weight using a cyclone and riffle splitter.
and Vast majority of the samples were recorded
sample dry, only few individual wet samples were
preparatio encountered.
n
Duplicates were split from the original sample
using a riffle
splitter.

The samples were sent to ALS Laboratories in
Townsville for sample preparation and
analysis. ALS Laboratories use best industry
standard sample preparation including drying,
crushing and
pulverisation.

Sample size is considered representative for
typical copper mineralisation in the Roseby
area. No new sub-sampled data
reported.

Quality of Drill Samples
assay Samples were analysed using a four acid digest
data and using ICP-AES +/- ICP-MS (method code:
laboratory ME-MS61) for 48 elements. This included
tests copper, with a detection limit of 0.2 ppm.
Four acid digestion is considered a
near-total digestion.

On return of copper values >1% a second series
of analyses were undertaken using an ore
grade four acid digest, followed by ICP-AES
analysis optimised for accuracy and precision
at high concentrations (method code
Cu-OG62).

Gold was analysed using a 50g fire assay and
AAS finish (method code: Au-AA24). On return
of gold values >10ppm, a second series of
analyses were undertaken by fire assay and
AAS finish, laboratory method Au-AA26.

Quality Control included standards (certified
reference materials) inserted into each
sample batch to test the accuracy of the
laboratory analysis. Standards included
blanks and tested a copper range of 1,000ppm
to 11,000ppm, and a gold range of 190ppb to
600ppb inserted into the sampling sequence at
1:18 ratio; and field duplicates taken using
a riffle splitter on site for every 20th
sample. Laboratory checks were also carried
out on sample pulps.

All duplicate and reference data display
acceptable accuracy and precision.

No samples were analysed by an umpire
laboratory.

No geophysical tools were used to determine
the results reported
here.

Soil Samples
Soil samples were routinely analysed for
copper (and a suite of other elements) using
a Niton XL3tGOLDD+ hand-held XRF instrument.
Analyses are conducted routinely under
controlled conditions in the site office.

Quality Control included standards (certified
reference materials) used included blanks and
tested a copper range of 30ppm to 22,000ppm.
Standards were inserted into the sampling
sequence at 1:8 ratio and included
representative material for copper. The Niton
data displays a consistent low bias by 20-30%
against the reference data. The low bias of
the Niton instrument has been documented over
numerous campaigns of sampling in different
material
types.

VerificatioResults were checked by several Altona
n of personnel for correlation with geology and
sampling field activities supervised by senior Altona
and personnel.
assaying
No twinned holes. QMR001 was drilled to
confirm historical drilling with significant
gold results (for historical data background,
refer to Altona Quarterly Report September
2017).

All field logging or field sampling data was
done using a laptop and uploaded into the
company Datashed database and validated by
company database
personnel.

All assay files were received in digital
format from ALS Laboratories. All Niton
handheld XRF soil data was downloaded from
the instrument in digital format. Data was
uploaded into the Altona Datashed database
and validated by company database personnel.
No manual data inserts took
place.

No adjustments have been applied to the
results.

Location Collar locations have been surveyed using a
of data handheld GPS (Garmin GSMAP78s) with an
points approximate 5 metre horizontal accuracy.

Downhole surveys were completed using
non-magnetic Gyro tool for azimuth and dip or
were completed using an Eastman downhole
single shot camera.

Soil sample locations are surveyed using
handheld GPSs (Garmin GSMAP78s) with an
approximate 5 metre horizontal accuracy.

The Grid is GDA94 MGA Zone 54.
Data Drill spacing is generally: at Companion three
spacing east-west sections at an
and
distributi~300 metre spacing along strike of angled (~60
on degree) RC holes of 48-96 metres depth
(down-hole) spaced to test the peaks of
copper-in-soil anomalies;

at Veiled on two east-west sections at a 80
metre section spacing along strike with two

angled (~60 degree) RC holes per section to
54-90 metres depth (down-hole); and at Quamby
on six

east-west sections at ~80 to 200 metre spacing
along strike of angled (~60 degree) RC holes
of 60-174 metres depth (down-hole) spaced to
test the peaks of copper and gold-in-soil
anomalies
. At Quamby one hole was drilled with a north
azimuth.

The soil sample grid spacings are typically:
Veiled ~ 20mE by 20mN;

Quamby ~20mE by 40mN stepping out to ~40mE by
80mN; and Companion ~20mE by 40mN stepping
out to ~40mE by
60mN.

OrientationThe strike of mineralisation at Companion,
of data Veiled and Quamby is interpreted to be
in North-South with predominant steep easterly
relation or westerly dips.
to
geological
structure At Companion drilling results indicated steep
westerly dips on the western structure and
scissoring holes were drilled to confirm
geometries for future deeper drill tests.

The dip of mineralisation at the three
prospects is poorly understood and the drill
intercepts may not represent true widths or
be as interpreted on accompanying
cross-sections.

Sample Drill samples were collected into pre-numbered
security calico bags, packed directly and shipped by a
courier to ALS as they were collected. Unique
sample numbers were retained during the whole
process. Samples were stored in Altona
facilities in Cloncurry prior to the
transport to Townsville. Assays pulps and
representative RC rock chips for each
interval are retained and stored in Altonas
facilities in
Cloncurry.

Soil samples are collected and bagged into
pre-numbered plastic clip-lock bags. Unique
sample numbers were retained during the whole

process.Samples were collected and delivered
to the Altona field office daily as they were
collected. Soil samples were retained for
reference and stored in Altona facilities in
Cloncurry.

Audits or Internal audits and reviews of key datasets
reviews collected by Altona have been undertaken.
Past exploration data by other explorers has
only been validated against the source
references.

The results from QA/QC samples are routinely
analysed by the database manager and
geologist on a batch and campaign basis.

For laboratory analyses, the accuracy of key
elements such as copper and gold was
acceptable and the field duplicate assay data
was unbiased and shows an acceptable level of
precision.

For handheld Niton XRF analyses the data may
display a consistent bias against the
reference data. In contrast laboratory umpire
samples from the reported soil anomalies
displayed no bias and an acceptable level of
precision for the purpose.

No external audits or reviews have been
undertaken.

Section 2: Reporting of Exploration Results
Criteria Commentary
Mineral The Quamby prospect sits within Exploration
tenement Permit for Minerals
and land (
tenure EPM) 25760. The Companion and Veiled
status prospects sit within
EPM
25761. These EPMs are 100% owned by Altona
Mining Ltd, were granted in late 2015 and
are in good
standing.

No joint ventures apply.
There are agreements in place with the native
title holders, the Kalkadoon people and with
landholders.

No significant historic sites or national
parks are located within the reported
exploration
sites.

ExplorationPrevious exploration has been undertaken by
done by several parties at Companion and Quamby. For
other details refer to the Altona Quarterly Report
parties for September
2017.

No previous modern exploration by other
parties has been conducted at Veiled. The
prospect was identified by soil sampling
programs conducted by Altona from 2016 –
2017 which also identified very small early
1900s copper oxide surface workings.

Geology Mineralisation is considered to be similar to
other IOCG deposits in the area
Mineralisation is hydrothermal, varying from
stratabound and structurally
controlled.

At Companion mineralisation is developed
within subparallel steep east and west
dipping structures along the 1.2 kilometre
of tested extent within a 3 kilometre long

copper-in-soil anomaly. Mineralisation occurs
as
chalcopyrite and pyrite hosted in strongly
silicified quartzite and

as malachite and goethite in the weathered
zone (commonly 30 metres
deep).

The Veiled prospect is a discrete bullseye
high tenor copper-in-soil anomaly.
Unrecorded small early 1900s shallow copper
oxide workings are centred over the anomaly
on north striking structures with local
brecciated metasedimentary rocks and gossan
outcrop and float.

In fresh rock mineralisation occurs as chalcop
yrite and pyrite in altered metasedimentary
rocks, and

as malachite associated with
goethite-hematite rich zones in the
weathered zone.

The mineralisation is locally associated with
cobalt
with the best intersection being 6 metres at
0.12%
(VLR001
) from 10 metres including 1 metre at 0.2%.
Higher grade copper-gold zones were
intercepted within the oxide
zone
and further drilling is required to
determine if these reflect primary
mineralisation or a supergene enriched
zones. Base of oxidation is approximately 30
metres
depth.

At Quamby unweathered mineralisation occurs as
disseminated chalcopyrite and pyrite hosted
in strongly altered metasediments and

as malachite, native copper and chalcocite in
the weathered
zone
. The base of oxidation is approximately 25
metres

deep.
Drill hole Collar locations, elevations, azimuth, dip
Informatio and lengths are presented in Table 2 of this
n release.

Down hole widths of the mineralisation are
presented in Table 1 of this
release.

Data Standard intercepts were calculated using a
aggregatio 0.1% and 0.3% copper-equivalent cut-off (to
n take into account the notable gold with
methods copper at Companion and Veiled) and a 1%
copper cut-off. A minimum of 4m intercepts
are
re
ported here and narrower intercepts
equivalent

to or better than 4m at 0.3% copper. Typically
a maximum of consecutive

4 metres of below 0.3% or 0.1% internal
dilution
was
allowed within each intercepts for
intercepts reported at the two lower
cut-offs.

These exploration results are not from
Mineral
Resources
.
Copper Equivalent values (CuEq) are provided
in drill intercept summary in Table 1 for
comparative reference only. Copper
Equivalent (CuEq) values are calculated
using

a copper price US$2.95/lb) and a gold price
of US$1,250/ounce). Copper Equivalent (CuEq)
grade is calculated by the following
equation: Cu Eq. = Cu% + (Au g/t x 0.62).
Copper Equivalent values do not take into
account the recoverability of copper or
gold.

RelationshiAt Companion, Veiled and Quamby drilling
p between orientation is considered to be
mineralisa approximately perpendicular to the strike of
tion mineralisation. The dip of mineralisation at
widths all three prospects is not well
and constrained
intercept
lengths At Companion drilling results indicate
subvertical to steep westerly and reported
intercepts are not true
widths.

At Veiled steep structures and bedding are
mapped at surface but alternative internal
flat dips to the broader zone of
mineralisation are not precluded by the
drill data.

At Quamby drilling orientation is considered
to be approximately perpendicular to the
orientation of the broader copper
mineralised
structure
.
Diagrams Please refer to Figures 1 to 13 and Tables 1
and
2.

Balanced The best results for each hole have been
reporting reported in Table 1 including all
significant results using the criteria
described
above.

These exploration results are not for Mineral
Resource
s.
A full compilation of available data
collected by Altona and compiled from
previous explorers has been referenced in

the Altona Quarterly Report for September
2017.

Other Exploration results are not for Mineral
substantiv Resource
e s.
exploratioHeritage clearance surveys have been
n completed
data
prior to drilling.
Further Additional work will consist of RC and
work diamond exploration drilling, prospect scale
mapping, further surface sampling and ground
based geophysics such as IP.

APPENDIX 2: Resource Estimates for the Cloncurry Copper Project.
Deposit Total Contained Measured Indicated Inferred
Metal
TonnesGrade Copper Gold TonnesGrade Tonne Grade Tonnes Grade
millio tonnes ouncesmillio millio million
n n n

Cu Au Cu Au Cu Au Cu Au
% g/t % g/t % g/t % g/t
Deposit in Mine Plan
Little Eva 105.90.520.09546,000295,0037.1 0.600.0945.0 0.460.0823.9 0.500.1
0 0

Turkey Creek21.0 0.59 123,000- – – 17.7 0.59 3.4 0.58-
Ivy Ann 7.5 0.570.0743,000 17,000- – – 5.4 0.600.082.1 0.490.0
6

Lady Clayre 14.0 0.560.2078,000 85,000- – – 3.6 0.600.2410.4 0.540.1
8

Bedford 4.8 0.800.2138,000 32,000- – – 2.3 0.950.232.5 0.660.1
9

Sub-tota153.30.540.09829,000430,0037.1 0.600.0974.0 0.520.0742.2 0.530.1
l 0 1

Other Deposits
Blackard 76.4 0.62 – 475,000- 27.0 0.68- 6.6 0.60- 42.7 0.59-
Scanlan 22.2 0.65 – 143,000- – – – 18.4 0.65- 3.8 0.60-
Longamundi 10.4 0.66 – 69,000 – – – – – – – 10.4 0.66-
Legend 17.4 0.54 – 94,000 – – – – – – – 17.4 0.54-
Great 6.0 0.61 – 37,000 – – – – – – – 6.0 0.61-
Southern

Caroline 3.6 0.53 – 19,000 – – – – – – – 3.6 0.53-
Charlie 0.7 0.40 – 3,000 – – – – – – – 0.7 0.40-
Brown

Sub-tota136.70.61 – 840,000- 27.0 0.68- 25.0 0.64 84.7 0.59-
l

Total 290.00.580.051,668,0430,0064.1 0.630.0599.0 0.550.05126.9 0.570.0
00 0 4
JORC 2012 Disclosure is provided in ASX Release of 2 August 2017 entitled The Cloncurry Project: JORC 2012 Disclosure.
Little Eva is reported above a 0.2% copper lower cut-off grade, all other deposits are above 0.3% lower copper cut-off.
Resources have been reported as inclusive of Reserves.